PMMP Manufacturer 5KW 10kw 15kw Inverter Welder 15kw Hybrid Solar Inverter
Product Detail
This product is a power frequency industrial grade MPPT solar inverter control machine. The power section is 2000-6000W AC output, including inverter, solar controller, and charger in one. Wireless monitoring allows you to remotely control the working status and control of the solar generator. It adopts the design of ring-shaped power frequency isolation and energy-saving transformer, which is impact-resistant. Strong load capacity, suitable for inductive loads such as air conditioners, water pumps, and motors. It is the gospel of all kinds of perceptual loads.
There are 3 working modes: 1. Mains power priority; the national grid power supply is used first, and the power grid will automatically switch to the inverter (battery) state to work. 2. Energy-saving mode: when no load is detected in the inverter state, it will automatically switch to sleep 3. Solar energy priority: Prioritize the use of photovoltaic power generation. When photovoltaic power generation is not enough, it will automatically transfer to the mains for complementary power supply. When photovoltaic power is restored, it will automatically transfer to photovoltaic priority power supply
Advantage 1: The system gives priority to the use of photovoltaic energy. When the photovoltaic energy is not enough for local loads, it will be supplemented by the mains, which can make full use of photovoltaic energy. Advantage 2: In this working mode, the battery will only be discharged and supplemented when the photovoltaic energy is insufficient and the power grid fails. . Under normal circumstances, the battery is fully charged, so the service life of the battery will be greatly extended.
performance
Remote control
Application Scenario
Features
1. Built-in MPPT solar controller 60A/100A (optional PMW type)
2. Output power 2000-6000W 220VAC
3. The maximum tracking effect of MPPT is greater than 98%
4. Optional WIFI, 4G, GPRS wireless remote monitoring
5. Shut down and start solar charging function
6. Compatible and complementary with the engine
Warehousing
Parameters
Technical specifications | |||||||
Model:HUL | 20212/24 | 30224/48 | 40224/48/96 | 50248/96 | 60248/96 | 70248/96 | |
Rated power | 2000W | 3000W | 4000W | 5000W | 6000W | 7000W | |
Peak Power ( ms ) | 5000W | 7500W | 10000W | 12500W | 15000W | 17500W | |
Start the motor ( HP ) | 1HP | 2HP | 2.5HP | 3HP | 3HP | 4HP | |
Nominal battery voltage ( Vdc ) | 12V/24V | 24V/48V | 24V/48V/96V | 48V/96V | |||
installation method | floor installation | ||||||
Built-in solar controller charging current (optional) | PWM: 20-60A (12V system) 20-60A (24V system) 20-60A (48V system) MPPT: 30-100A (12V system) 30-100A (24V system) 30-100A (48V system) 30-100A ( 96V system) | ||||||
Machine size (L*W*H mm) | 485*258*415 | 485*258*468 | |||||
Package size(L*W*H mm) | 575*355*545 | ||||||
Net weight(kg) | 22Kg | 24.2Kg | 29Kg | 33Kg | 35Kg | 37Kg | |
Gross weight (kg) (carton packaging) | 23Kg | 25.5Kg | 30kg | 34kg | 36Kg | 38Kg | |
General parameters | |||||||
Input | Battery input voltage range | 10.5V-15V (single battery voltage) | |||||
Input phase system | L+N+PE | ||||||
AC input voltage range | 85-135Vac/165-265Vac | ||||||
AC input frequency range | 40-65HZ | ||||||
Mains low voltage to battery | 85Vac/165Vac±5% | ||||||
Mains low voltage recovery | 95Vac/175Vac±5% | ||||||
Mains high voltage to battery | 135Vac/265Vac±5% | ||||||
Mains high voltage restoration | 125Vac/255Vac±5% | ||||||
Output | output phase | L+N+PE | |||||
The output voltage | 110Vac/120Vac/220Vac/230Vac/240Vac±5 (inverter mode) | ||||||
AC frequency | 50/60Hz±1% (inversion mode) mains automatic tracking and synchronization | ||||||
output waveform | pure sine wave | ||||||
Inverter no-load loss | ≦20W | ||||||
Inverter efficiency | ≥90% (88% resistive load) | ||||||
Mains efficiency | ≥99% (no charging state) | ||||||
harmonic distortion | THD≦3% (resistive load) | ||||||
Operating mode | Mains priority | Prioritize the use of the national grid power supply, and automatically transfer to the inverter (battery) state to work when the power grid fails | |||||
Energy saving mode | In the inverter state, when no load is detected, it will automatically switch to the dormant state (to save the reserve power) and is suitable for special scenarios | ||||||
Solar first | Prioritize the use of photovoltaic power generation. When photovoltaic power generation is not enough, it will automatically transfer to the mains for complementary power supply. When photovoltaic power is restored, it will automatically transfer to photovoltaic priority power supply. | ||||||
Built-in solar controller (optional) | Charging mode | MPPT or PWM | |||||
Controller current | MPPT:12-96V 30-100A PWM:12-48V 20-60A | ||||||
PV input voltage range | MPPT: 60V-150V(48V system); 120V-220V(96V system) PWM: 18V-22V(12V system); 30V-42V(24V system); 60V-88V(48V system); | ||||||
Maximum photovoltaic input power MPPT | MPPT: (12V system) 30A/415W;40A/555W;60A/828W;100A/1380W; (24V system)30A/830W;40A/1110W;60A/1650W;100A/2760W; (48V system)40A/2200W; 60A/3300W; 100A/5500W; (96V system) 60A/6500W; 100A/10000W. | ||||||
Maximum photovoltaic input power PWM | PWM: (12V system) 20A/240W; 30A/360W; 40A/480W; 60A/720W (24V system) 20A/480W; 30A/720W; 40A/960W; 60A/1500W (48V system) 40A/2000W; 60A/ 3000W | ||||||
Standby loss | ≤3W | ||||||
Conversion efficiency | MPPT≥98% / PWM≥80% | ||||||
Battery input | Lead-acid, gel, AGM battery custom settings | ||||||
Lithium battery (set before factory) | |||||||
Protective function | Overvoltage, undervoltage, overload, short circuit, overtemperature, overcurrent, surge, etc. | ||||||
Panel display | LCD+LED | ||||||
Cooling method | Forced air cooling | ||||||
Conversion time | ≦4ms (typical load) | ||||||
Communication (optional) | RS232/RS485/Mobile APP (WIFI/GPRS) | ||||||
surroundings | Operating temperature | -10℃~40℃ | |||||
Storage temperature | -15℃~60℃ | ||||||
Altitude | 2000m (more than the need to derate use) | ||||||
noise | ≤65dB | ||||||
Relative humidity | 0%~95%, no condensation |